Tuesday, March 19, 2024

SOP on Preventive maintenance of Vibro Sifter

1.0 Objective: To lay down a procedure for Preventive Maintenance of Vibro sifter. 2.0 Scope: This SOP is applicable for the preventive maintenance of Vibro sifter to...

Handling of Break Down Maintenance

Objective To define a procedure for Handling of Break Down Maintenance. Scope This SOP is applicable for break down of any equipment. Responsibilities Engineering personnel will attend the break...

Calibration of UV-VIS Spectrophotometer

1.0    Objective To lay down the procedure for calibration of UV-VIS Spectrophotometer 2.0  Scope This procedure is applicable for the Calibration of UV-VIS spectrophotometer. 3.0  Responsibilities QC officer/ Executive...

SOP on Guideline for Preparation of Site Master File

Objective To write a guideline for preparing Site master File (SMF). Scope This Sop is applicable for preparation of Site master file. Responsibility QA Personnel Head QA, Procedure Site Master File (SMF)...

Recording System for U.V. Lamp burning hours

Objective To maintain a record for UV Lamp burning Hours Scope This Sop can be applicable to all UV like LAF, water system, garment cubicle etc. Responsibility User department...

SOP on Change Control Management

Objective To write a procedure for change control management Scope All the changes in documents, facility, equipment, system etc. Responsibility Head QA, Head production Plant head Procedure Change control: Change control is a...

SOP for operation , cleaning and maintenance of UV-VIS Spectrophotometer

1.0 Scope : This procedure is applicable for the operation, cleaning and maintenance of UV-VIS spectrophotometer installed in Quality Control laboratory of pharmaceutical industries. 2.0...

Procedure of Operation of Lux Meter and monitoring the Lux level

1.0 Objective To lay down a procedure of operation of the Lux meter and monitoring the lux level. 2.0 Scope This standard operating procedure is applicable for...

Inventory, Storage, Issuance, Withdrawal, Destruction and Reconciliation of Rubber Stereo

1.0 Objective To lay down a procedure for Inventory, Storage, Issuance, Withdrawal, Destruction and Reconciliation of Rubber stereos used on packing / overprinting machines. 2.0 Scope This...

SOP for DISPOSAL OF WASTE

SOP for DISPOSAL OF WASTE 1.0 OBJECTIVE :   The objective of this SOP is to provide written guidelines for disposal of waste material generated during manufacturing and...