SRF Limited -Walk-In Interviews for Production, Instrumentation, Electrical & Polymer Process On 20th &...
SRF Limited -Walk-In Interviews for Production, Instrumentation, Electrical & Polymer Process On 20th & 21st May' 2022
Job Description
Walk-In Interviews for Production, Instrumentation, Electrical &...
Detergent and Disinfectant in Pharmaceutical Industry
Detergent
Detergent are surfactant or mixture or surfactants which have cleaning properties in dilute solution. Mainly four types of disinfectant are anionic, cationic, nonionic and...
Spore Staining – A Basic Overview
What is endospore?
Functions of endospore
How to stain endospore
Endospores – Some bacteria in the vegetative form such as Bacillus spp. and Clostridium spp. When subjected...
Difference Between Fumigation and Fogging and Validation of Fogging in Cleanroom
Fumigation and fogging are two methods commonly used in pharmaceutical companies to control the microbial contamination in controlled area. But now a day’s fumigation...
Ultra Violet Light – Role & Application in Pharmaceuticals
Ultraviolet light (UV) is electromagnetic non ionizing radiation and under wavelength (240-280 nm) use as a effective anticepticize or disinfection for the killing of...
Selection of Incubation Conditions for Environment Monitoring Plates in Pharmaceutical Microbiology
Environment monitoring plays an important role in observing and controlling the contamination in controlled areas. Selection of environment monitoring incubation condition is an important...
The Use of Risk Assessment Tools For Microbiological Assessment of Cleanroom Environments
Environmental monitoring describes the microbiological testing undertaken in order to detect changing trends of microbial count and microflora within cleanroom or controlled environments. The...
Identification of Sampling Location for settle plate method during bio load montoring of Production...
The effectiveness of Settle plate technique which is employed for monitoring of bio load in manufacturing area mainly depends upon the sampling locations chosen...
SOP on Operation, Cleaning and Maintenance of Microscope
1.0 Objective:
1.1 To lay down the procedure for Operation, Cleaning and Maintenance of Microscope
2.0 Scope:
2.1 This SOP is applicable for Operation, Cleaning and Maintenance...
Calibration of steam sterilizer (Autoclave)
Calibration of Autoclave by Biological Indicator:
Put five indicators of Bacillus steriothermophilus spores at five different locations in the chamber.
Run Autoclave at 121°C...