Tuesday, April 7, 2020

Critical Quality attributes for tablet process parameters—

 PROCESS PARAMETERS, AND QUALITY ATTRIBUTES FOR TABLETTING UNIT OPERATIONS Unit operation Process parameter Quality attributes Mixing 1.    Order of addition 2.    Mixer load level 3.    Impeller speed and  time 4.    Chopper speed...

SOP for Entry and Exit Procedure for Personnel in the Factory Premises

1.0 Objective 1.1 To lay down an Entry and exit procedure for personnel in the factory premises. 2.0 Scope 2.1 This SOP is applicable for entry and...

SOP for Entry and Exit Procedure in Production Area

1.0 Objective To lay down a procedure for plant entry and exit procedure in production area. 2.0 Scope This SOP is applicable to all plant employee (Gents)...

List of Standard Operating Procedure (SOPs) in Production – Oral

Entry and Exit procedure Drain Point numbering, cleaning and sanitization Transfer of finished goods to FG Store Product Change Over Issuance of extra packing material SOP on procedure for...

Working and principle of Rapid Mixer Granulator (RMG)

Rapid Mixer Granulator is a multi-purpose processer equally suitable for high speed dispersion of dry powders, aqueous or solvent granulation, and effervescent products and...

Working and Principle of colloidal Mill

Colloidal Mill is used to reduce the particle size of a solid present in different liquid forms or solid forms of the pharmaceutical ingredients...

Capacity Calculation of Coating Machine

Brim volume of coating pan and the bulk density determine the capacity of tablet coating machine. For coating uniformity capacity calculation of tablet coating machine...

SOP for Entry and Exit Procedure in Aseptic area

1.0 Objective To lay down a procedure for entry, exit and gowning procedure in aseptic area. 2.0 Scope This SOP is applicable for only qualified persons for...

TABLET DEFECTS AND IT'S REMEDIES………Holistic approach..!!!

TABLET DEFECTS AND REMEDIES The defects related to Tableting Process Capping: It is partial or complete separation of the top or bottom of tablet due...

Defects of Tablets during Compression

Sr.No. Appearance Defects 1. Capping:- ‘Capping’ is the term used, when the upper or lower segment of the tablet separates horizontally, either partially or completely from the main...