Preventive Maintenance Program
Preventive Maintenance Program
Based on the qualification studies, a program for preventive maintenance of all major manufacturing equipments and critical support systems should be developed...
Pressure Differential in Pharma Manufacturing Area
Know the importance of pressure differential in pharmaceutical manufacturing and how it is maintained to prevent cross contamination.
Importance and Maintenance of Pressure Differential in...
SOP For Bowie Dick Test
1.0 Objective:
To lay down a procedure for bowie dick test
2.0 Scope:
This SOP is applicable for Bowie Dick test in pharmaceutical plant.
3.0 Responsibility:
Production Officers /Executive...
Tablet, Mechanical Theory……Bonding In Tablet..!!!
BONDING IN TABLET: (THE MECHANICAL THEORY)
•The mechanical theory proposes that under pressure the individual particles undergo elastic/plastic or & brittle deformation & that the...
Film Coating Process of Tablet in Pharmaceutical Manufacturing
Learn about film coating process, difference between Aqueous and Solvent (non-aqueous) film coating and parameters.
Film coating Involves spraying a solution of polymer + pigments...
SOP on Control of Sieves and Screens
1.0Objective:
To lay down a procedure for Control of Sieves and Screens of different Equipments.
2.0Scope
This Standard Operating Procedure is applicable for formulation plant of pharmaceutical...
Different Types of Temperature Sensors
Temperature is most widely measured physical variable in the environment. An ambient temperature condition is a vital aspect in pharmaceutical industry because it may...
HVAC (Heating, Ventilation and Air Conditioning) : An Overview
HVAC is an essential aspect in pharmaceutical industry as factors like temperature, relative humidity and ventilation have a direct impact on the quality of...
Fluidized Bed Dryer and Bag Filters
Fluidized bed dryer
Drying is very much important for wet granules for compression into the tablet and for modifying the characteristics of viscous and sticky...
Establishing the minimal and maximal optimum speed during qualification of blender
Procedure for establishing minimum optimum speed:
Run the machine as per the standard operating procedure. Set the lowest RPM possible and run the machine for...
