Drain Point Cleaning & Sanitization
Drain Point Cleaning & Sanitization
The cleaning procedure for drains present at different areas of the premises shall be done:
Daily
Weekly
Daily Cleaning
Flush the drains...
Establishing the minimal and maximal optimum speed during qualification of blender
Procedure for establishing minimum optimum speed:
Run the machine as per the standard operating procedure. Set the lowest RPM possible and run the machine for...
Fluidized Bed Dryer and Bag Filters
Fluidized bed dryer
Drying is very much important for wet granules for compression into the tablet and for modifying the characteristics of viscous and sticky...
Preventive Maintenance Program
Preventive Maintenance Program
Based on the qualification studies, a program for preventive maintenance of all major manufacturing equipments and critical support systems should be developed...
In-Process Checks (Stage – Dry Syrup Packing)
In -Process Checks (Stage – Dry Syrup Packing)
1. In case of In-process during stage of packing weight check is very important, following are the procedure...
Different Types of Temperature Sensors
Temperature is most widely measured physical variable in the environment. An ambient temperature condition is a vital aspect in pharmaceutical industry because it may...
HVAC (Heating, Ventilation and Air Conditioning) : An Overview
HVAC is an essential aspect in pharmaceutical industry as factors like temperature, relative humidity and ventilation have a direct impact on the quality of...
Critical Quality attributes for tablet process parameters—
PROCESS PARAMETERS, AND QUALITY ATTRIBUTES FOR TABLETTING UNIT OPERATIONS
Unit operation
Process parameter
Quality attributes
Mixing
1. Order of addition
2. Mixer load level
3. Impeller speed and time
4. Chopper speed...
